Features
- High conforrmability & mouldability
- Radiolucent Material
- Porous weave allows the skin to breath
Indications
- For most orthopaedic applications in which rigid immobilization is required, including fresh and unstable fracture
Instructions for Use
- Slip on stockinette up the affected part and wrap with cast padding.
- Gloves must be worn while wrapping the casting tape since the resin in the tape will adhere to the skin.
- Select the desired width of the cast. Open only one roll at a time, since room humidity may initiate hardening.
- Immerse the role of tape in water with room temperature (20-25ｰ C ) for 5-10 seconds and squeeze 3-5 times.
NOTE: Squeezing the roll while it is submerged will give a setting time of approximately 3 minutes. To lengthen the setting time, immerse the roll and remove immediately without squeezing which will give a setting time of approximately 4 minutes.
Construct the cast tape by wrapping spirally. While wrapping ensure that the previous turn is overlapped by one-half to two-thirds the width of the tape. Just three or four layers provide a strong non-weight-bearing cast and five to eight layers are typically adequate for weight-bearing cast. Additional layers are generally not necessary for strength and will reduce porosity.
After application, allow 20-30 minutes before applying loads to weight-bearing casts.
For one time use only, The product cannot be reused.
